Make Your Own Cane or Walking Stick from a Sapling Tree
A DIY cane or walking stick is
This post contains affiliate links. You will not pay extra for products purchased through those links, but we may earn a small commission from the sale.
DIY Runs in My Family
My Dad learned to make a lot of handy tools, furniture, and decorative pieces the way that his father made them. I come from a long line of ‘do-it-yourselfers’ who had to make do with what they had on hand. Coming from farm country, we didn’t have a lot of extra money to buy what we needed or wanted. So I grew up with quite a few handmade items in our home. The older I get, the more I appreciate my DIY background.
Here is a short video of my Dad showing me how he does some of the shaping and bark removal on a walking stick. He also shows me the knife he made from a worn out reciprocating saw blade and a short length of copper water pipe. Keep reading for the step by step instructions he uses.
I distinctly remember my Grandfather making canes like this and my Dad has continued the tradition. I do believe he has outdone my Gramps!
For another post about my Dad and one of his projects, check out Dried Beans in a Jar or My Dad is Full of Beans!
Getting Started On Your Cane or Walking Stick & A Precaution
Caution – These instructions call for using sharp objects and manual labor. Be sure you know how to use the tools properly and keep them sharp for best results. I cannot be responsible for improper use of tools or any injury resulting from these activities. At one point in these instructions, my Dad uses a piece of broken plate glass to smooth the wood. Please use gloves and extra care when doing this. He has tough hands and a lot of practice with this!
Selecting & Harvesting The Sapling for Your DIY Cane or Walking Stick
First, you need to harvest the raw materials for your project. Choose a hardwood species that is strong but not brittle. Maple,
The saplings used for the walking sticks and canes you’ll see in this article are ironwood. It grows well in my Dad’s woodlot and he has plenty for his projects and to leave enough for the future.
Look for a sapling that is about the right circumference around the base of the trunk. This will depend a lot on how large you want your cane or walking stick to be. You’ll want a fairly straight trunk without any large knobs, knots, or imperfections.
The sapling must be strong enough to support the person using it, without being so heavy as to be cumbersome. After a few tries, you are sure to get the hang of selecting a suitable young tree.
Dig or Cut a Sapling for Your DIY Cane or Walking Stick
To harvest the sapling, you will need a tool such as a mattock ax for digging up the roots if you plan to make a cane. A walking stick may be cut off at the base of the sapling with an ax, hatchet, or saw. The handle of a cane will be one of the roots, but a walking stick doesn’t need
You may need to harvest several saplings to find one that has the right size and shape of root to make a suitable handle. This is something you cannot plan for because, of course, you can’t see what the roots look like until you dig them up!
Using the mattock ax, carefully chop and dig around the base of the sapling about a foot out from the trunk. This will give you some space to swing the mattock without damaging the trunk. It will also save more of the root for your cane handle. You can cut off the excess later.
Dig up the roots and knock the soil off. Does the sapling have a root that is about the right size, strength, and shape to make a nice handle? If so, you are done digging! If not, or if you wish to make more than one cane, you may dig more saplings to suit your needs.
Using an ax, hatchet, or saw, carfully remove the top of the tree and all of the branches. Be sure to leave enough of the trunk for your cane or walking stick. Don’t chop into the staff of your future cane or walking stick!
Curing & Rough Shaping of the Sapling
Once you have your raw materials, you can carry them home and cure them. Leave the saplings in a dry, protected spot to cure for 3 months or more. Once the wood has dried and cured, you are ready to begin shaping and smoothing it.
Begin by cutting the handle and staff off at about the right length for the person who will use it.
Use a wood rasp or file to do the rough shaping of the wood. A rasp will leave deeper grooves in the wood, so use it for removing the large stubs left from cutting off side branches. You may also use a flat wood file for this purpose. Smooth off any stubs, knobs, or lumps that you don’t want on your finished product.
Removing the Bark for a More Finished Look
Once the cane or walking stick has been shaped to your liking, you may remove the bark. You could leave the bark if you want a rustic looking DIY cane or walking stick. If you prefer to have a smooth and more polished look, use a drawknife, knife, or wood file to remove the bark. A file will leave grooves in the wood, so you will have more work to do to smooth those grooves out.
Smoothing the Wood
Once the bark has been removed, use sandpaper or a piece of broken plate glass to remove the sapwood or cambrium down to the hardwood underneath, if you desire. You may also remove the sapwood selectively to create a design with the different colors of wood.
Smooth your final product down to remove any burrs, splinters, or cracks.
Carving a Design in the Wood
At this point, you may carve or file designs in the wood for a more decorative look, or to give a texture that prevents your hands from slipping on the handle when in use. For those who are skilled with whittling, you may carve the handle of the cane, or the top of the walking stick, with a shape. The head of a bird, dragon, or other decorative design may be suggested by the natural shape of the wood. This is purely a personal decision and you may prefer to leave
Finishing Your Cane or Walking Stick
Once your cane or walking stick has been shaped, smoothed, and carved according to your desires, you may treat the wood with varnish, paint, or another finish to your liking.
Walking sticks may have a hole drilled through the top of the staff for threading a piece of paracord or rope for hanging. The cord also allows the user to put their hand through the loop to hold the walking stick and still have the use of their hands.
Don’t Skip the Rubber Tip
Another finishing touch is a rubber tip on the bottom to prevent damaging floors and prevent the cane from slipping while in use. Without the rubber tip, it is much more likely that the cane will slip when pressure is applied, possibly causing a fall. You may need to whittle down the tip of the staff to fit the rubber tip onto the end. Glue the rubber tip in place if it seems loose.
If your walking stick is for hiking in the woods you probably don’t need a rubber tip.
Other Projects You Can Make…
My Dad makes canes and walking sticks to give to friends, family, and for fundraisers. The American Legion and other organizations have benefitted from his skill and generosity.
He also makes his own handles for tools such as axes, pickaxes, hatchets, mauls, drawknives, and many other tools. You can often find ax heads and other tools at flea markets, auctions, and garage sales for a reasonable price. If you like to salvage these and give them a new life, you can also make your own handles with a bit of practice!
This site is a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for The New Homesteader’s Almanac to earn fees by linking to Amazon.com and affiliated sites. You will not pay any extra for these products and we earn a small commission to help support this free website.
Shared on Family Homestead and Off Grid Hop
In addition to writing for her own websites, Lisa has contributed articles to The Prepper Project and Homestead.org.
The author lives outside of Chicago with her husband, son, 2 dogs, 1 cat, and a variety of poultry.